Setting and using the alarm

適用対象:

There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2 (secondary). You can set the wakeup time for either alarm with the radio on or off. The indicator for the selected alarm flashes when setting time or mode.

Setting the alarm time

to set alarm 1, follow these steps:

Turn the system off

on the radio, press and hold the alarm set button. the "alarm" indicator for alarm 1 will begin to flash on the display

while holding alarm set, press either tuning button to change the alarm time. the displayed time changes slowly, then more rapidly as you hold the button

release alarm set when the desired alarm time is reached

to set alarm 2, follow these steps:

Turn the system off

on the radio, hold down the alarm set button, and press and release the alarm mode button

the "alarm 2" indicator will begin to flash on the display. you have 10 seconds to begin setting the alarm time by pressing either tuning button. the displayed time changes slowly, then more rapidly as you hold the button

release alarm set when the desired alarm time is reached. the "alarm 2" indicator will continue to flash on the display for 10 seconds. when the flashing stops, the alarm 2 time is set

Turning on/off the alarms

to turn alarm 1 on/off, follow these steps:

Turn the system off

on the radio, repeatedly press the alarm mode button until the desired alarm mode indicator below "alarm" is displayed. the music note indicates radio and the sound waves indicate the alarm tone. if no icons appear on the display, that means the alarm is turned off

Radio and tone

Radio only

Tone only

Alarm off

to turn alarm 2 on/off, follow these steps:

Turn the system off

on the radio, press and hold the alarm set button. "alarm" flashes on the display

while holding alarm set, press the alarm mode button once. "alarm 2" flashes on the display

release alarm set, and repeatedly press alarm mode until the desired alarm mode indicator above "alarm 2" is displayed. if no icons appear on the display, that means the alarm is turned off. the "alarm 2" indicator will continue to flash on the display for 10 seconds. when the flashing stops, alarm 2 is set

Changing the alarm sound

to change the alarm 1 sound, follow these steps:

Turn the system off

on the radio, repeatedly press the alarm mode button until the desired alarm mode indicator below "alarm" is displayed. the music note indicates radio and the sound waves indicate the alarm tone

To wake to a preselected radio station, follow these steps:

press and hold alarm set

press the preset button for the station you want

Adjust volume to desired level, follow these steps:

for the radio, use the volume buttons to set the volume

for the alarm tone, choose the alarm tone and set the alarm to go off. when alarm sounds, press either volume button to adjust the volume

press on/off to turn the alarm off

to change the alarm 2 sound, follow these steps:

Turn the system off

on the radio, press and hold the alarm set button. "alarm" flashes on the display

while holding alarm set, press the alarm mode button once. "alarm 2" flashes on the display

release alarm set, and repeatedly press alarm mode until the desired alarm mode indicator above "alarm 2" is displayed

To wake to a preselected radio station, follow these steps:

while "alarm 2" flashes, press and hold down alarm set

press the preset button for the station you want

Adjust volume to desired level, follow these steps:

for the radio, use the volume buttons to set the volume

for the alarm tone, choose the alarm tone and set the alarm to go off. when alarm sounds, press either volume button to adjust the volume

press on/off to turn the alarm off